Home » Products » Diesel Engines » DEUTZ Diesel Engines (for Generator Sets) » 509KW DEUTZ Water-Cooled Diesel Engine

509KW DEUTZ Water-Cooled Diesel Engine

Engine Model: BF8M1015CP-LA G3
Gen-set engine performance data Engine Model: BF8M1015CP-LA G3
Control Systems: mechanical / electronic Power: 458KW(PRP) No. of cylinder: 8
Aspiration Mode: Turbocharged Inter-cooling Method: CAC
Cylinder Type: One-cylinder-one-head Displacement: 15.874L
Cylinder Arrangement: V-form 90° angle
Rotation speed and power
Rotation Speed Specification 1500rpm 50Hz
Power 509KW (LTP)
Effective Pressure 25.6bar
MAX. exhaust gas temperature 550℃
Charge air temperature 219℃
Inlet air (25℃/1000mbar) 2079 m3 /h
Emission 2493 kg /h
Notes:
1.While engine under testing, fan and alternator not included.
2. According: ISO3046-1
Engine Data: 1500rpm
Dry weight kg 1060
Max. engine width mm 920.5
Max. engine length mm 1142.3
Bore mm 132
Stroke mm 145
Compression ratio 16.5
Rotation direction (View from flywheel) Anti-clockwise
Flywheel housing SAE1
Flywheel 14 "
No. of flywheel teeth 167
Engine support Rigid bracing
Max. noise value at 1m (left and right sides of engine) dBA ≤99
Power decrease value: By increasing per 100m while exceeding an altitude of 1000m ≤0.90%
Power decrease value: By increasing per 10 ℃ while exceeding a temperature of 30 ℃ ≤4%
Battery voltage V 24
Starter rated power kW 9
Generator Capacity A 55
Generator voltage V 28.5
Max. exhaust backpressure mbar 50
Max. allowable air inlet resistance mbar 50
Turbocharger inlet size mm 150
Turbocharger exhaust flange connect bolt 2-4×M10
Turbocharger exhaust flange inner diameter size mm 117
Lubrication systems:
Min. oil pressure at 1500rpm (oil temperature 90℃) bar ≥3
Min. oil pressure at 600rpm ( oil temperature 90 ℃ ) bar ≥1
Oil temperature of normal operation < 130
Oil consumption rate <0.3% of fuel consumption
Oil pan Flywheel side
Oil pan inclination ° 22.5
Initial oil filling L 48
Oil filter element type Disposable filter
No. of oil filter element 1
Cooling Systems:
Engine coolant capacity L 21
Water-pump flow L/min 347
Water-pump pressure bar 1.25
Allowable pressure loss of cooling system (include pipeline) bar ≤0.35
Heat carry off by coolant kW 330
In & Outlet coolant size mm 70
Temperature of switch on two thermostats respectively 79/87
Temperature of switch on two thermostats totally 94/102
Max. allowable operating temperature 103
Temperature difference between inlet and outlet coolant ≤8
Inter-cooler cooling power kW 190
Charge air outlet size mm 127
Fan Exhaust type
Fan connection Gear drive + coupler
Fan diameter mm 980
Air volume of fan m3/s 4.6
Fan power consumption kW ≤14.1
Fan transmission ratio 0.96
Cold starting systems:
Lowest ambient temperature of cold starting without assistant (standard configuration) -17
Lowest ambient temperature of cold starting with flame preheat plug -32
Fuel Systems:
Cylinder ignition sequence 1-8-4 -5-7-3-6-2
Idle speed rpm 650
Low-pressure pump oil load capacity L/h 190
Fuel filter element type Disposable filter
No. of the fuel filter element 2
Related products
Inquiry Form